Presentation-switchers PS550 Manuel d'utilisateur télécharger pdf (Page 32)

Page 32 Presentation Switchers, Inc.

Testing the Display Codes

Connec ng Directly to the Display Device

When tes ng display codes, the PC must be connected directly to the display device using a

null-modem cable, in most cases. Ensure that the baud rate listed on the main form matches

the baud rate of the display.

Select the Code

Select “Turn On” ﬁ rst then press the Test bu on. The display device should turn on. If it does

not, verify the codes are correct, cabling is correct, and communica ons parameters are correct

and repeat the test. Repeat the process for each command.

Testing the Relays

Connect Directly to the Series 500

When tes ng relays, the PC must be connected directly to the Series 500 with a null modem

cable.

Select the Relay / Contact Closure

Select the contact closure and press the Test bu on. Verify the contact provides the desired

response and repeat the process for contact two.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 40 41

Pas de commentaire

Presentation-switchers PS550 Manuel d'utilisateur Page 32