Presentation-switchers PS550 Manuel d'utilisateur télécharger pdf (Page 17)

Page 17Series 500 Installation Guide

input and volume level. If this screen is not currently displayed, press the Cancel bu on repeat-

edly un l the main screen is illuminated.

To enable the output resolu on using the EDID pass-thru method follow these steps:

1. Press the volume control knob once to enter the menu mode.

2. Rotate knob to Output and press knob (or select Input 3 bu on)

3. Rotate knob to Resolu on and press knob (or select Input 1 bu on).

4. Rotate knob to EDID Passthru and press knob (or select Input 1 bu on).

5. Rotate the knob to select which device will provide the EDID nego a on.

Setting Output Resolution using Table Lookup

This feature allows one to override automated source and display resolu on nego a ons and

set the output to a ﬁ xed resolu on.

To begin, ensure that the main default screen is displayed. The main screen displays the current

input and volume level. If this screen is not currently displayed, press the Cancel bu on repeat-

edly un l the main screen is illuminated.

To set the output resolu on from a table follow these steps:

1. Press the volume control knob once to enter the menu mode.

2. Rotate knob to Output and press knob (or select Input 3 bu on)

3. Rotate knob to Resolu on and press knob (or select Input 1 bu on).

MAIN MENU

1.>STATUS

OUTPUT

1.>RESOLUTION

CHOOSE METHOD

1.>EDID PASSTHRU

EDID DEVICE

1.>HDMI

MAIN MENU

1.>STATUS

OUTPUT

1.>RESOLUTION

1. EDID PASSTHRU

2.>TABLE SELECT

Press: 3 1 2

Shortcut

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

Pas de commentaire

Presentation-switchers PS550 Manuel d'utilisateur Page 17